Port light wiring
2000, 3000 SCR
I'm in need of changing out my port light. The wires won't come up through the hole in the deck as a previous owner put too much electrical tape on the connection. Don't want to pull too hard and loose the wire altogether. Is there a way to access the wiring from below. I thought if I removed the plate from under the bow pulpit, I would be able to reach them, but that does not provide any access. Looking for some direction. Mike |
Note sure with this boat model but can you access the wires from the cabin anchor locker assess panel?
|
Where is that access panel located. Is it in the anchor locker or from inside the cabin.
|
My 2400 SCR has one inside the cabin at the head of the V-birth.
|
1 Attachment(s)
|
Perfect, thanks Mike. I thought that may be the case. I'll check out how that comes off later today. Mine has a mirror there.
Mike |
Quote:
|
All times are GMT. The time now is 01:13 AM. |
Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2025, vBulletin Solutions, Inc.