Port light wiring

[mikebmaxum3000]

2000, 3000 SCR
I'm in need of changing out my port light. The wires won't come up through the hole in the deck as a previous owner put too much electrical tape on the connection. Don't want to pull too hard and loose the wire altogether. Is there a way to access the wiring from below. I thought if I removed the plate from under the bow pulpit, I would be able to reach them, but that does not provide any access. Looking for some direction.
Mike

[mmwjr]

Note sure with this boat model but can you access the wires from the cabin anchor locker assess panel?

[mikebmaxum3000]

Where is that access panel located. Is it in the anchor locker or from inside the cabin.

[mmwjr]

My 2400 SCR has one inside the cabin at the head of the V-birth.

[mmwjr]

Panel between the speakers

[mikebmaxum3000]

Perfect, thanks Mike. I thought that may be the case. I'll check out how that comes off later today. Mine has a mirror there.

Mike

[mmwjr]

Originally Posted by mikebmaxum3000

Perfect, thanks Mike. I thought that may be the case. I'll check out how that comes off later today. Mine has a mirror there.

Mike

Mine is hinged and swing up.