Reply
 
Thread Tools Search this Thread Display Modes
 
Old 10-26-2023, 11:17 AM   #1
Lieutenant
 
Join Date: Jul 2023
Location: Croatia
Posts: 83
Exclamation Stove Issues

I had a short circuit in the battery charger and now there is no 220V voltage.
According to the diagram there is a master fuse, where is it located?
Attached Thumbnails
27.png  
__________________

Ivan Horvat is offline   Reply With Quote
Old 10-27-2023, 12:31 AM   #2
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,587
Default

Quote:
Originally Posted by Ivan Horvat View Post
I had a short circuit in the battery charger and now there is no 220V voltage.
According to the diagram there is a master fuse, where is it located?
Most likely behind the power panel.
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 11-02-2023, 11:45 PM   #3
Lieutenant
 
Join Date: Jul 2023
Location: Croatia
Posts: 83
Default

In general, I disassembled the power panel, except for the switches there is nothing there.
But I already have electricity on board.

The following problem was also discovered: the electric stove does not work.

Since I have no experience cooking on board, I'm not sure if I need a stove or not, what are your thoughts?
Ivan Horvat is offline   Reply With Quote
Old 11-03-2023, 05:59 PM   #4
Lt. Commander
 
Join Date: Jul 2020
Posts: 120
Default

Never used my stove.

Not a fan of cooking on a boat.
Always used a portable Coleman and found a beach to cook on.
My 2 cents.
P.S. Hope you get my gauges, no idea where there at.
Mr Hemi is offline   Reply With Quote
Old 11-03-2023, 07:29 PM   #5
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,587
Default

Think to break out a volt meter to see where you are loosing power. I never use the stove either.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 11-04-2023, 12:30 AM   #6
Lieutenant
 
Join Date: Jul 2023
Location: Croatia
Posts: 83
Default

Quote:
Originally Posted by mmwjr View Post
Think to break out a volt meter to see where you are loosing power. I never use the stove either.
Seems one resistor is broken. There is no chance to find an electrics scheme, so I do not know the type of resistor and its resistance.
My stove is Origo 2500E
Attached Thumbnails
Stove1.jpg   Stove2.jpg  
Ivan Horvat is offline   Reply With Quote
Old 11-04-2023, 12:58 AM   #7
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,587
Default

Quote:
Originally Posted by Ivan Horvat View Post
Seems one resistor is broken. There is no chance to find an electrics scheme, so I do not know the type of resistor and its resistance.
My stove is Origo 2500E
Looks like some charing. Looks like a wire wound resistor. Part number or some identification is on it.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 11-06-2023, 10:00 AM   #8
Lieutenant
 
Join Date: Jul 2023
Location: Croatia
Posts: 83
Default

Quote:
Originally Posted by mmwjr View Post
Part number or some identification is on it.
Yes, it is
SETA
3K3
JHO
RB 60
Ivan Horvat is offline   Reply With Quote
Old 11-06-2023, 05:35 PM   #9
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,587
Default

Quote:
Originally Posted by Ivan Horvat View Post
Yes, it is
SETA
3K3
JHO
RB 60
Google SETA 3K3 and you will see resistors that look like it.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 11-08-2023, 10:28 AM   #10
Lieutenant
 
Join Date: Jul 2023
Location: Croatia
Posts: 83
Default

I did it
There are a lot of available resistors
3.3 ohm
33 ohm
0.33 ohm

which one should I use?

there is a quiestion
Ivan Horvat is offline   Reply With Quote
Old 11-08-2023, 05:30 PM   #11
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,587
Default

Quote:
Originally Posted by Ivan Horvat View Post
I did it
There are a lot of available resistors
3.3 ohm
33 ohm
0.33 ohm

which one should I use?

there is a quiestion
None it should be 3300 or 3.3K ohm. The K =1000 multiplier
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 12:20 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.