Shore power hatch

[Miccon911]

The hatch that cover my shore power outlets has a broken corner on it. Does anyone anyone know where I can buy a new hatch? Thanks for any suggestions. I have a 2000 3300 scr Michael

[mmwjr]

Welcome aboard

You will need to work with a plastics company, take them the broken one to use as a pattern.

[jimq26]

I took the easy way out - just replaced the original with this unit. Matches the original for screw holes etc. https://www.westmarine.com/buy/marin...4?recordNum=21

[mmwjr]

Originally Posted by jimq26

I took the easy way out - just replaced the original with this unit. Matches the original for screw holes etc. https://www.westmarine.com/buy/marin...4?recordNum=21

I took it he is looking for the transom hatch and not just the receptical cover.

[jimq26]

My old 1990 2755 had just the single shore power receptacle. Mike, I didn't know they changed the set-up on newer models.

[mmwjr]

Originally Posted by jimq26

My old 1990 2755 had just the single shore power receptacle. Mike, I didn't know they changed the set-up on newer models.

Jim what I was talking about isn’t the shore power cover but the hatch on the transom where the shore power receptacles and storage are located on bigger boats. However after rereading the OPs writeup I think you are right and he is talking about the cover on the shore power receptacle.

[shrew]

Originally Posted by mmwjr

Jim what I was talking about isn’t the shore power cover but the hatch on the transom where the shore power receptacles and storage are located on bigger boats. However after rereading the OPs writeup I think you are right and he is talking about the cover on the shore power receptacle.

Clarification from the OP would be helpful.

The 2000 3300 has the shore receptacles inside of a locker on the transom. I also assumed the OP was referring to the locker hatch and not the cover of the shore power receptacle itself.