Maxum 2400scr 1998 cabin door

[Earl0523]

I need to replace my cabin door on my 1998 Maxum 2400scr. Any suggestions on where I can get this?

[Gugi47]

Welcome aboard.
Approx 48 H x 24W x 3/8 thick acrylic?
If you lucky and find one, would be minimum $500.
Why you don't buy the material and drill it after the old one?
You will save tons of money.

[mmwjr]

You’ll need to make a replacement yourself or have it made for you.

[Baby Blue]

Not sure if this will work for you but see my thread on starboard material cabin door.

http://www.maxumownersclub.com/forum...door-8099.html

[Earl0523]

Baby Blue- Did you route both sides on the Starboard for the door? 1/8"?

[Baby Blue]

Originally Posted by Earl0523

Baby Blue- Did you route both sides on the Starboard for the door? 1/8"?

I cut it on my table saw with a triple chip carbide blade. Makes for little Kerf marks but you can sand it if needed with 220 then 320 for nice finish if needed.
Then put a 1/4" round over on all sides and front and back with router.
Hope that helps
BB

[Gugi47]

You can get that in smoke tint color #2370 Bronze 3/8". You can't see in but you see out. Just a suggestion.
0.375" X 24" X 48" 2370 Bronze Plexiglass Acrylic Sheet

[Earl0523]

Thank you Gugi47- Does it come with the edges finished? rounded?

[Gugi47]

Originally Posted by Earl0523

Thank you Gugi47- Does it come with the edges finished? rounded?

I don't know.
But you can call them and ask all you questions.
They probably can do it for some extra money.....you know nothing come free. But you never know.
Good luck.

[shrew]

Starboard can be routered easily.

[NickNick]

I ordered a sheet from this company. I had a friend at an auto-glass shop cut and round the edges. The door is pretty much an exact match!
Put this link in your browser:
http://www.maxumownersclub.com/forum...door-7891.html
Hope this helps.