Maxum 2100

[Lutzen]

Hello my Maxum Boot friends,
since I do not get any reasonable help here in Germany,
I hope that the right experts are here ;-)
I have been driving a Maxum 2100 SC3 since last year and would like to exchange the bow roller for a larger one.
Does anyone have a good tip on how to get the screws loosened without dismantling the whole cabin?
And then as the next step I would like to install an electric anchor winch, someone has experience with it and can give me some tips.

Thank you and best regards from Germany ;-)
Lutz

[mmwjr]

Welcome aboard!

While I’m not familiar with this model is there an anchor locker accessible either on the foredeck or from the cabin? If so this should give you access to the nuts that secure the roller bracket bolts. Next to address your inquiry to install a windless I would recommend a horizontal one that has the motor assembly above deck as I doubt there is enough room for a vertical windless and enough room for the anchor rode.

[Lutzen]

Thanks a lot.
Please do not misunderstand but I know this rough information. I am looking for someone who has done this myself on a 2100 SC3 and can give me details.
Best regards Lutz

[mmwjr]

Originally Posted by Lutzen

Thanks a lot.
Please do not misunderstand but I know this rough information. I am looking for someone who has done this myself on a 2100 SC3 and can give me details.
Best regards Lutz

Hopefully some with this model and has installed a windless chimes in.