holding tank capacity????

[SCOOBY151]

good day guys/gals,
How would I know when the holding tank is full?
Yesterday I flushed and left the wet/ dry selector in the dry position and there where alot of bubbles in the toilet which smelt pretty bad too. Also if left empty in the dry selection, the toilet fills up a bit too. Any info would be nice. By the way , the boat is a 2700 scr of 1993,
Sorry for being a little graphic.
James

[cunuck]

look at the tank and see the water level that how I check

[Tommyfmu]

We know when our tank is full when we can't pump it anymore.

[SCOOBY151]

Originally Posted by cunuck

look at the tank and see the water level that how I check

sorry for being ignorant, but which tank are you talking about? The only tank I can see on my boat is the potable water tank. I cannot see another one, unless its hidden somewhere.

[seapuppy]

2700 should have the potable water on the stbd side as well as the santank right next too it.......the macerator pump should be sitting right close too it...or on it...


SP

[SCOOBY151]

my potable/shower/sink water tank is on the port side. I never noticed any other tanks. Will put on a full search the next time I am on the boat. Btw, mine is the 2700 scr 1993.
James

[tex'npepper]

You can find the tank by tracing back from the pump out fitting. Mine is inclosed in a box with tread on top in the engine compartment, inboard from the fresh water tank. It's impossible to tell how full it is. I have learned from experience that if the pump out fitting is showing pressure from a full tank, stand well back before opening it. On second thought, it is wise to stand well back anyway.