Engine Hatch

[All Summer Long II]

Can’t get my engine hatch to lift automatically on my 2001 3500SCR. I think the trim tabs motor lifts the hatch. I’m wondering if there is a breaker somewhere that I’m missing? Any ideas? Thanks

[mmwjr]

The hatch lift will have its own motor/pump. Do you hear it run? There should be an access to allow the pin to be remove so you can manually lift it. Then you see if the pump is getting power or not.

[All Summer Long II]

It looks like it’s run by 1 of the trim tab motors? I did unhook The access pin and have access.

Problem at moment is I can’t remember which switch is connected to the hatch motor!

Regardless I press several and the hatch doesn’t work. Does anyone else have the hatch run by the Bennett trim tab motor?.