carb
it could be the cause of a vacuum leak too...first off..get a 1/2 socket and check the torque on the mounting bolts of the carb to the intake...should be about 120 inch/lbs.......or good and snug...then...after it's warmed up....see if it does it then....if not it was a vacuum leak...also check the screws to the top plate of the bowl on the carb....should check the torque on that by tightening cross pattern.....
if that works...then the last thing is to check the idle screw...should be on the right side of the carb where the linkage to the throttle is attached.......
hope this helps...
__________________
__________________
Don't compare your life to others. You have no idea what their journey is all about.
------------------------
SSN683 Association member
Par Excellence
------------------------------
2008 Bayliner 340 - "Wild Whim"
--------------------------------------
I live in my own little world....but it's okay-they know me here!!!
Avid practitioner of the martial art: KLIK-PAO.
Tap-Rack-Bang
Anyone that sez "Size doesn't matter" has never owned a boat!
|