2800SCR Rear Canvas/Window attachment...

[MikeM]

Hey all---got the new canvas in from Leta's, the top and front/ sides fit like a dream. Got the new slant back windows, and they have the grommets on the rear panels for bungee clipping to the transom. The PO made new canvas with snaps above the grab rail, but the original plastic fittings are still on there---but really don't have any idea how it's supposed to work/look---anyone have pix of this setup with elastic bungee loops holding the rear canvas down? Mike

[seapuppy]

Mike ..glad you got it all ...what they do is take a piece of bungie chord...stick into one grommet..tie a knot in the end on the inside of the panel...then stick the other end into the next grommet....tie another knot in that end...then all you have to do is pull the bungie down to the post and slip it on....the length of the bungie is about 4" - 6" long depending on how tight you want to pull it down....sorry that i don't have a picture of it from my 2455...they had them there..but it's not hard to tie a square not in the end of the bungie and go to the next grommet....

only work with 2 grommets per bungie.....

SP

[MikeM]

Thanks! I assumed that was the way to go--should be kinda nice, as those snaps were always a bear to get snapped, especially when glass was cold--Cheers-Mike

[Bella Sera 3300SCR]

Originally Posted by MikeM

Hey all---got the new canvas in from Leta's, the top and front/ sides fit like a dream. Got the new slant back windows, and they have the grommets on the rear panels for bungee clipping to the transom. The PO made new canvas with snaps above the grab rail, but the original plastic fittings are still on there---but really don't have any idea how it's supposed to work/look---anyone have pix of this setup with elastic bungee loops holding the rear canvas down? Mike

http://i789.photobucket.com/albums/y...inspics013.jpg