2400 rear bench bracket

[Chamilun]

Any idea where to get one of these ?

[mmwjr]

I had some made 10 years ago for mine at work. Don’t think you’ll find this and will have to come up with something on your own.

[Chamilun]

Yea probably gonna get one 3d printed. Or just throw an L bracket on there

[NickNick]

I was able to weld a piece of angle iron to a piece of flat stock and it matched fine.
I did dip it in that plastic stuff to keep it from gouging the fiberglass.
This happened when the boat was new in 1996. It's still just like it was then.
I would suggest NOT using plastic.

Nick
96 2400 SCR 5.7L 2-bbl.

[Chamilun]

Thank you sir. Got the seat back together. Was completely rotten inside as whoever redid before used regular stapes and regular plywood... Wasn't pretty

Replaced with PVC material and making a metal bracket as you mentioned.

Next weekend getting recovered seats reinstalled. Plus nee house battery. Should be fun