Go Back   Maxum Boat Owners Club - Forum > Maxum General > Maxum Owners General Discussions
Click Here to Login
Register FAQ Community Calendar Today's Posts Log in

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-29-2023, 04:03 PM   #1
Ensign
 
Join Date: Jun 2023
Posts: 6
Default 2002 3300 scr Wiper Arm p/n or mfg

Hello all
I bought low hour 2002 3300 SCR- The boat came without both wiper arm and blades- bolts are on the motors for the wiper arm. Does any one know who made the wiper arm, length, and size of wiper blade that was used.

Thanks

Dan
Attached Thumbnails
Maxum 3300 SCR wiper motor.jpg  
__________________

Dan Luczak is offline   Reply With Quote
Old 06-29-2023, 05:36 PM   #2
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,623
Default

Look up pantograph wiper arms. Measure from bottom to top of windshield to get the length.
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 06-29-2023, 05:52 PM   #3
Ensign
 
Join Date: Jun 2023
Posts: 6
Default

Not all pantograph wiper arms are the same-- most do not have the holes for the two nuts on motor
Dan Luczak is offline   Reply With Quote
Old 06-29-2023, 09:16 PM   #4
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,623
Default

And,... buy one that does. Maxum bought it from a 3rd party and added their own part number in the parts manual without traceability back to OEM part number. You’re just going to have to find a match unless some else already did so and can provide the information on what they bought. Good luck.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 07-03-2023, 01:01 PM   #5
Lt. Commander
 
Join Date: Jul 2019
Posts: 226
Default

I replaced mine on my 3300 in 2020. Bought from Amazon.
Any auto parts store will have wiper blades


Sent from my iPhone using Tapatalk
sph801 is offline   Reply With Quote
Old 08-14-2023, 06:09 PM   #6
Ensign
 
Join Date: Jun 2023
Posts: 6
Default

Hello all
I sourced arm and blades from https://getautotex.com/?syclid=9e4cd...5-1f17b180a63d They were very helpful and make sure I had all the parts needed
__________________

Dan Luczak is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 05:03 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.