2000 2300 SC porta potti

[keith2300SC]

need to replace a leaky porta potti , don't worry I don't use it ! Does anyone know what make this unit is and where I can get one ? Thanks , Keith

[ss3964spd]

No idea Keith, are there n o markings on yours?

Dan

[keith2300SC]

no none ...

[shrew]

Try taking a look at these to see if you see something that migt look familiar. The whole thing just screws down to the sole in the head so I would think that you should be able to find something with a similar footprint. If not, you could always fill the holes with epoxy, gel them over then re-drill new holes for the new porta pottie. If you really wanted to get ambitious, if you can find some room in the engine compartment to install a holding tank, then you could upgrade to a Jabsco pump toilet and a pump out and avoid the nastiness of dumping a porta pottie manually

http://www.defender.com/category.jsp...&sort=products

http://www.westmarine.com/webapp/wcs...011081&Ns=Most Popular|0&catalogId=10001&omniTag=Category%3aSelf-Contained+Heads&viewTaskName=SiteSearchView

Just a couple of thoughts.

[ed & inge]

maybey a mail to maxum would help......

the one i had originally in my 2400 sc3 (2009) but took it out because i needed the space for something else comes from:

Sanitation Equipment Limited

35 Citron Court, Concord, Ontario, Canada, L4K 2S7

Parts & Service (905)738-2467 Fax (905)738-2483

the tipe is VISA MSD, and it's US coast guard certified (type 3)

you can install it on the holding tank or on the thru hull discharge fitting

greatz, ed

[keith2300SC]

Thanks , I will look at these options .

[ed & inge]

hope you'll succeed

greatz, ed