Quote:
Originally Posted by Bears94
the ends of the slide rail are glued/bolted down. I loosened the back of the chair but can't even get that all of the way off. I will try again this weekend.
|
What shrew asked is if you can remove the stop at the end of the slide then slide the two halves until they separate. The bolted down half of the slide would stay on the boat and the upper half would come off with the seat.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2
Mike
|