Toilet

[mmwjr]

Originally Posted by Chamilun

Ok. So toilet is now working great.

However, when water is pumped etc I have water showing up in the rear where the bulge pump is. Aft pump. Is this normal or do I have a leak somewhere between the toilet and either supply or drain?

Sounds like either a leak in the waste hose or holding tank. Try disconnecting the waste hose at the head and see if water still shows up in the bilge. Note you will get water in the head area that should go into the shower drain and can be pumped out by running the drain pump.

[jmalvaso]

First of all what did you do to get it working?

[Phillbo]

If you are pumping water into the bilge, you have a leak... Bilge should ALWAYS be dry!!!

[Chamilun]

Replaced the whole upper mechanism. Could have rebuilt with gaskets but it was missing parts so I took the easier route.

I don't know if I can see hoses beneath behind the refrigerator but there is certainly a leak but it seams anytime you pump it. So I'm guessing it's more a supply issue than waste but shall hopefully find out soon