SCR 3000 Prop

[jayesq]

I have a 1999 3000SCR with twin 5.0L and bravo 2. I need to replace my starboard prop and can't find the size on it. Does anyone know what size prop this model came with, I am assuming they have not been modified based on my knowledge of the original owner.

thank you

[timer]

I have just purchased a 98 with the same motor/drives & unfortionately im wondering the same. I didnt want to start a new thread but was wondering if anyone can help. My boat has 2 different props on it now & one spare (again different) I believe the props on it are 21" pitch & the spare is a 23.
Thanks

[biggerseagar]

On my 2001 scr 3000 with 5.0L and bravo 2's it has 21 × 18 3/4 alum.

Roger

[shrew]

Welcome aboard Timer!!

[timer]

Thanks GUYS
Biggerseagar. Im assuming your 2001 is fuel injected vrs mine with itty bitty carbs. Is the horsepower the same? & i assume 220hp. Correct?
Thanks
Timer

[biggerseagar]

Two old fashion carbs.........I love them.......


Roger

[timer]

Thanks Roger


Timer

[timer]

Roger
I went to my local mercruiser dealer & had them check the part#on my props & they are 17 3/4 x 21pitch. There was a mercruiser program on the computer in which you input all the boats data & it suggests prop size. 17 3/4 x 21 was high on its list of suggestions. Me being unsure i asked him what size props were availble for this motor/drive configuration. It seems 18 3/4 x 21 is not available. All im asking, is are you sure?
Thanks again
Timer

[biggerseagar]

Timer ......all I go by is what is on the survey report. Next time I get down to my boat I'll look on the props. When you get the boat in the water try both of the props out to see what works the best.

Roger

[timer]

Thanks Roger