fixed window leak: SCR 2300

[ccruser1]

Greetings everyone.

I have a leak in the port side fixed window that I need to repair. Has anyone removed one of these?
I see screws inside the cabin and outside on the deck around the window. Do all of these have to be removed or just the ones outside. Also, can the rubber moulding be reused if it appears to be in good shape.
I have already try'd to remove one of the inside screws and of course it has snapped off fairly flush just inside the trim around the window.
Any advise would be appreciated.
thanks and be safe.
ccruser1

[pascavone]

i replaced a oval window because the plastic hing broke.

the window do not have a gasket to the hull, its just calked in.

you should first just calk it, and see if that works, with a garden hose.

spray it low, wait for leaks, then move up to the top after a few days and test it.

if you replace the whole window, you'll have to pry the collar out of the hull, and then re calk.

mine was a whole unit for $200 bucks.