Canvas Plus

[stock333]

Has anyone used them. They seem to be not responsible on e mails or after speaking with them on the phone no further response. Has anyone had the same problem.

Thanks

Mark

[dannyrayz]

Not at all. Kim answered every time I called and great response

[shrew]

Maxum Customer Care - FAQ

Does Maxum manufacture replacement upholstery and canvas parts for boats built in 1997 and older?

Maxum does not manufacture upholstery or canvas for boats built before 1997.

For canvas parts on 1997 and older models you may go to Leta's Top Shop at http://www.letastopshop.com or by calling (360) 435-3067.

For upholstery you may contact Canvas Plus at (360) 435-0932 or by email at canplus@aol.com.

[shrew]

This is the marine industry. You're probably going to need to pick up the phone.

[deanries]

I have done business for over 15 years with Canvas Plus. Like stated earlier the contact will go to Kim and she has either called or replied by email to discuss, verify or other on the order. Been a plus for my 1992 Maxum 1800SR since they have the patterns that originated from Maxum. Excellent quality and great service for me!
deanries (Go Big or Go Home)

[stock333]

waiting for my new skins to arrive from Kim ordered transom and 3 back cushions.

will take pictures of before and after

[gmc60]

Good Morning
Canvas plus did a great job for my 32scr

[dannyrayz]

Looks great, just took my time. SS staples. Just slightly different from original with the groove widths. Piping matched too.

[Gugi47]

Originally Posted by dannyrayz

Looks great, just took my time. SS staples. Just slightly different from original with the groove widths. Piping matched too.

That looks great. Nice job.

[deanries]

Originally Posted by stock333

waiting for my new skins to arrive from Kim ordered transom and 3 back cushions.

will take pictures of before and after

Stock333 -
Look forward to see your photos as I have plenty entered into my album which is public, check them out. Kim has been delightful to work with and the skins were like OEM and made my boat look new again (1992 Maxum 1800SR). Enjoy the new upholstery and fun on the water!
deanries (Go Big or Go Home)

[stock333]

Hi when u put your skins on can u tell me what guage staples u used and what kind of gun.

Thanks
Mark

[dannyrayz]

See pic. Stainless steel 1/2". Original was 3/8"

[stock333]

Originally Posted by dannyrayz

See pic. Stainless steel 1/2". Original was 3/8"

Thanks,

I order a electric nailer 22 guage 3/8 x 3/8 stainless steel staples per Kims suggestio,.

Hope to state tomorrow will post picturs.

[stock333]

[stock333]

Originally Posted by stock333

Attachment 5607

Attachment 5608

Attachment 5609

Attachment 5610

received 3 stern seats skins and transom skin not shown and showing 1 seat that i have that will be covered

[stock333]

20180813_225351

first one done looks great

http://www.maxumownersclub.com/forum...1&d=1534326965

[deanries]

Mark -
The skins look great and better when installed! I sent you a private message on your question about using the proper staples. Had my done by the pro's who work on boats a lot. Great job and another proof that Canvas Plus is a fine quality business.
deanries (Dean) Go Big or Go Home

[stock333]

Just want everyone to know that the skins I ordered from Canvas Plus came out fantastic

and I would highly recommend them

Mark

[stock333]

any help on installing them i can make recommendations

[Shynstar1st]

I am working with Kim now. She is designing my aft backrest covers.
Cant wait see them!