I’ve watched many videos on this and have a 1998 1900 scr with original trailer and need to do some work (including repaint) on this trailer.
I have access to 2 large fork lifts, inside a flat warehouse, and I am wondering if the bow and stern strap down eyelets will be ample to support the lift and hold it while I work about 3 hours to work on the trailer.
Hey, just a though and not sure if it is feasible in your area, but am dealing with a similar issue with needing to do some work on the trailer. My plan is to go float the boat and tie it up at a public boat launch for a few hours while I work on the bunks on the trailer and do any other maintenance that way. Plan to just do it at the boat launch actually. If you have access like that that is close by may make sense to do that and seems like it would be way easier then doing what you are plannig. Maybe even just tie it up and lock it if it is a safe area as well or have someone stay with the boat then come back and retrieve it. Hope that helps....GLTY
Trailer removed from under boat on land
Linear Mode
