Removing anchor/platform-1992 2300scr

[Doug Moore]

I would like to know what is involved in removing the anchor/platform and reconfiguring the railing to be the same formation as the bow without the anchor. I see philips screw heads on the anchor platform but do not know if I can just unscrew them and then fill the holes once to patform is removed. To reconfigure the railing, can I just have someone come to see the new configuration and have them bend a frame to match the bow?

[seapuppy]

doug
the bow is bolted thru the fiberglass and is held with screws and nuts/washers on the inside....it is feasable to change the configuration of the bow rails...they would probably cut the bow rail off at a certain point...enter the bow thru the cabin and remove the screws and nuts....then pop the stanchions off...yes filling the fiberglass is recommended...

hope this helps.


SP

[shrew]

Welcome aboard Doug Moore. This begs the question.....why? Why would you want to remove the bow pulpit?