Anchor Roller or Guide

[chazkelly]

The bow anchor, which shares a cabinet with the fore swim ladder, does not have a roller or guide. So, when the anchor is deployed, the chain and rope just hang unprotected over the fiberglass hull. Does anyone know of a solution for this? Thanks!

[jparsons121]

It doesn’t appear a bow roller or pulpit would be possible with the ladder, however many boats use a piece of hardware called a chock that may fit your needs.

https://www.westmarine.com/buy/perko...91?recordNum=4

These can be positioned anywhere on the deck or gunnel to direct lines where you want them and provide a bit of protection for the deck.

[chazkelly]

Thanks JP! I was actually looking at what you suggested as a solution. Not ideal, but better than nothing.

[yahoo82]

You could combing the chock with chaffe guards. These Velcro around the line. A little work but would provide some protection.

Cape Hatteras Dock Line Chafe Guards 14" Black (Pkg of 2) https://www.amazon.com/dp/B007U8FX5M...ing=UTF8&psc=1


Sent from my iPhone using Tapatalk