It took me and a good friend of mine 2 days to do it. We removed all the doors and door knobs. Also took all drawers out. As you can see I also did the fridge panel to match.
The hardest part is getting it on without any bubbles. Sometimes you need to use a hair dryer to warm it up a little. We used a squeegee with a felt edge on it to apply it. The soft edge helps to not leave any marks. Exacto knife and other razor blades for the trimming. There are YouTube videos of diff tips and tricks.
It's a vinyl wrap made by vvivid. I purchased it off eBay that was the cheapest place I found it. Got 48" x 44' for $196 shipped.
Professional quality Rose wood grain knotty 22ft x 48" pre-laminated vinyl wrap | eBay
I was quite surprised at what little amount of info was on the internet about wrapping boat cabinets. In my opinion it the only way to go to upgrade the look and old fashion style of a dated interior. Mine wasn't bad just wanted a change. Hope this helps others.
I also believe it was worth the price and I've probably got 10+ ft leftover. We also messed up a few big pieces.
1999 3300 scr wrapped my cabinets.
Linear Mode
