Don't have on my boat now- but I have replaced the ski locker door a couple of times.
Easy- It's made of marine plywood. I used regular plywood to replace it! I covered the plywood with epoxy to make it waterproof and if you really want to put some more strength in it you can fiberglass it!
Take the old one and remove the aluminum channel, latch and drain, it's usually in good shape and you will reuse it. Strip the carpet and use the old one as a template to cut a new piece of plywood. I also beefed it up a bit by screwing 2 pieces of strapping to the bottom to stiffen it up. Reuse the old carpet if it's in good shape or get some new carpet and use the old as template. Some spray adhesive, staples and new screws and you done.
Half a day and about $20 bucks!
__________________
|