Trim limit adjustment Alpha 1 Gen 2 Stern Drive

[cruz'r]

One of the two screws holding the trim limit switch got rusted so bad and head came off, had to completely remove the trim limit switch to be able to drill and tap out the remaining part of rusted screw. Now, I'm ready to put back the trim limit switch with 2 screws on to port side of the gimbal. Here's my question - how to install the trim switch to make sure that my stern will move up and down to the specified limit?

[mmwjr]

For instrunctions look in your merc manual or google it.

Basically set the switch so the unit can be trimed all the way down (slight in) this will then determine max trim up.