Anyone have a picture of a factory installed Mercathode unit for a 7.4L. I'm pretty sure this is not the proper location (or wiring)
(The boat is a 93 2200SR. I believe someone changed out the Alpha/5.7 to the 7.4L/Bravo.) Yes the Carb is NOT the correct one. It belongs to a Corvette. Have the proper Webber/Merc coming. The engine may be a Corvette as well. Who knows?
Well, I can' imagine any good will come of that cable sheathing sitting right on the riser. That is going to get hot.
I can see there is a wire loom with wires already routing to the mercathode. It looks like it routes back behind the engine. I would expect the wire shoudl follow that path. It is too short, is that what the problem was? Or is that it coiled loosely down on the right?
I really appreciate your comment and yes that wire will go, however, I am speaking the actual mounting location of the Mercathode module.
On the other Merc 5.7's, I worked on, the module is mounted on the top of the main circuit breaker above the fuel water seperator. But this set up looks out of place.
Mercathode mounting
Linear Mode
