Impellor

[Ron K]

I have 2001 Maxum 3300 Cruiser. Does anyone know how to access the impeller?
Any experience changing impeller? Ron K

[mmwjr]

Originally Posted by Ron K

I have 2001 Maxum 3300 Cruiser. Does anyone know how to access the impeller?
Any experience changing impeller? Ron K

Welcome aboard

You start your own thread on this.

Assuming you have a Bravo drive the raw water pump is mounted on the starboard side of the engine. Remove the belt, then the two hoses on the pump, then remove the two bolts that attach the pumps bracket to the engine.

There is about 5 bolts to disassemble the pump to replace the impeller.

BTY there is one for each engine.

[Ron K]

Originally Posted by mmwjr

Welcome aboard

You start your own thread on this.

Assuming you have a Bravo drive the raw water pump is mounted on the starboard side of the engine. Remove the belt, then the two hoses on the pump, then remove the two bolts that attach the pumps bracket to the engine.

There is about 5 bolts to disassemble the pump to replace the impeller.

BTY there is one for each engine.

Thanks for quick response.

[shrew]

Moved to its own thread.

It depends on the outdrive. Alpha drives, the impeller is in the lower leg of the outdrive. Bravo's the water pump is mounted on the engine.