Good day, 2000 2100SR with 5.7 alpha 1 Gen 2. My temp gauge never moves from just around 110 deg. as you can see in the picture this is where it sits.
I have pulled the sending wire off and grounded it and it did not “peg” the gauge, am I safe to assume that the gauge is bad or is there anything I should check prior to this?
Many thanks sir, 1/2 the price of my local shop....but it still looks different than what’s in there so I think I’m going to replace them all with new better looking gauges and make/have a new cluster panel made as the OEM one is starting to look pretty old..... any suggestions on what material I should make it out of for a sleek look?
Mike I imagine you may have a good thought on this as well?
Why not repaint yours?
One of my friend do that in abstract and have two layers of clear eggshell to have a nice finish.
Looks very nice. But you have to do the acces , gloves compartment door to.
New gauge is in and took it for a quick 10 minute rip (I love having it in the marina!!) before the sun set and worked like a charm. I forgot to get one there so I will post a picture of the new gauge and get your guys opinion on my choice of gauge.
Temp gauge diagnostics
Linear Mode
