Scr 3100 depthfinder

[CAPTAIN HOOK]

I have a maxum 3100 scr (2002). Need to replace the through hull transducer. Does anybody knows which transducer to buy?
Thanks
Ron

[jparsons121]

Maxum used mostly Standard Horizon products during that time.
There may be a part number on the one installed that you can reference.

They normally don’t go bad, how did you diagnose that it needs replacement?

[CAPTAIN HOOK]

Thank you for your reply.
The cable of the through hull transducer is torn too close to the transducer and is irrepareble.

[jparsons121]

Fair enough. New transducer it is.
With that said, the option to retain the in dash depth finder as a slave to the new chart plotter is still viable. Just be sure that the new unit supports NMEA 0183 to feed the depth readings to the dash unit.

[CAPTAIN HOOK]

Thank you so much jparsons121

[jparsons121]

My pleasure

[99maxum211]

the wire ripped on my oem thru hull transducer and i would love to use the 1 my boat came with. all i have to do is buy that nema 0183?