Go Back   Maxum Boat Owners Club - Forum > Maxum General > Electronics
Click Here to Login
Register FAQ Community Calendar Today's Posts Log in

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-12-2014, 01:59 PM   #1
Ensign
 
Join Date: May 2014
Posts: 14
Default 2 beep alarm @ 2 min intervals

So my 2004 maxum 2400se with a 5.0 mpi mercruiser bravo 3. We were cruising around the harbor, all was well for 45 minutes. I start to get an alarm code with 2 beeps around 2 minute intervals. Would anyone recognize this code and if there are any links to where I could download a pdf list of all the codes, I need to be aware. Thank you.
__________________

captsavvy is offline   Reply With Quote
Old 06-12-2014, 03:16 PM   #2
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,682
Default

That sounds like the drive lube resevoir.
__________________

shrew is offline   Reply With Quote
Old 06-12-2014, 05:25 PM   #3
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,606
Default

Quote:
Originally Posted by shrew View Post
That sounds like the drive lube resevoir.

+1 check the fluid level in the resevoir.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 06-24-2014, 05:14 PM   #4
Ensign
 
Join Date: May 2014
Posts: 14
Default

So I have drive lube at full. Still getting the alarm. To correct my post, I'm getting a 2 beep alarm at 1 minute intervals. Not at two minute intervals as stated in my original post
captsavvy is offline   Reply With Quote
Old 06-24-2014, 09:58 PM   #5
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,606
Default

try disconnecting the wire on the lube resevoir, sometime the float sticks.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 06-25-2014, 12:33 AM   #6
Lieutenant
 
Painter's Avatar
 
Join Date: Feb 2012
Location: Delta, BC, Canada
Posts: 50
Default

You wont be able to figure out what it is by the alarm. 2 beeps every minute just means its a sensor. Intermittent continuous beeps is drive lube. Continuous horn would be other problems. The only way to actually know is to have it hooked up to a scanner. One of the most common sensor problems is the Idle air control if it is fuel injected
__________________

Painter is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 07:07 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.